Product List

(Total 125 Products )
We can make large diameter hollow wall spiral pipe extrusion line from OD200 to OD3500, which is mainly used in drainage system in city. Is for replacing of steel pipe, cement pipe ...
Min. Order: 1 Piece
Application & feature

1)It is workshop machine used to process PP, PE reduced tee.
2)It consists of machine body, clamp, driller, heating mirror, hydraulic station and ...
Min. Order: 1 Piece
BL series is small and light, with advanced structure, easy
assembly/disassembly. There′re two sealing types: Feeding sealing and mechanical sealing.
Suction liquid: Water or ...
Min. Order: 1 Piece
Working principle

The impeller is eccentricity installed on the pump body. It rotates to make eccentricity water ring with impeller. The water is fully filling into body and ...
Min. Order: 1 Piece
UPVC63-S and UPVC110-S double-
strand pipe extrusion line is developed base on advance European technology.

It realizes pipe′s good quality & good look, high performance & ...
Min. Order: 1 Piece
Successfully developed by Fangli, applying advanced latest European Technology.

It′s suitable for pipe extrusion such as PE, PP, PB, PERT and ABS, etc. Is nice outlook, ...
Min. Order: 1 Piece
The shuttle rotational moulding machine is not only capable of manufacturing the large size container, but also the small size products. And the machine is easy to operate and ...
Min. Order: 1 Piece
For storage and drying the material in plastic pipe extrusion
Feature
1. Even heat distribution
2. High efficient to save lots of time.
3. Accurate temperature control.
4. ...
Min. Order: 1 Piece
1. Electric hot melt sleeve,
2. Connecting fitting widely used for anti-conrrosion and insulating engineering and heat pipe network engineeting by compounding special electric hot ...
Min. Order: 1 Piece
1. Material of barrel and screw set: Nitriding treatment, Chrome-coating
2. Surface hardness: HV≥ 900 Nitriding depth: 0.5-0.8mm
Min. Order: 1 Piece
1. Material of barrel and screw set: Nitriding treatment, Chrome-coating
2. Surface hardness: HV≥ 900 Nitriding depth: 0.5-0.8mm.
Min. Order: 1 Piece
Application & feature

1.It was designed to be used in workshop to process elbow, tee and cross these fittings, according to setting angle and length to cut pipe.
2.Cut pipe in ...
Min. Order: 1 Piece
1. Material of barrel and screw set: Nitriding treatment, Chrome-coating
2. Surface hardness: HV≥ 900 Nitriding depth: 0.5-0.8mm
Min. Order: 1 Piece
This new pipe line using lastest German technology.

It can produce good heat-resistant PB pipe.

It can also co-extruded anti-oxygen layer.

PB pipe is mainly used as hot ...
Min. Order: 1 Piece
It is used together with barrel cooling unit of twin-screw extruder. They act as distributing devices at the same time. It is compact and well-sealed. It′s for automatic control ...
Min. Order: 1 Piece
It′s used to store all kinds of plastic granule.It does automatic feeding by loader with suction pipe inside the storage tank.It keeps the workshop clean and reduces material loss.
Min. Order: 1 Piece
1. Suck air from sealed equipment or system to make absolute pressure lower than atmospheric pressure. It′s better for wet or corrosive air.
2. Compact and easy connection with ...
Min. Order: 1 Piece
1. Necessary accessory device for twin-screw extruder.
2. It can replace air cooling or water cooling device.
3. Controls barrel temperature effectively enforced cycle by high ...
Min. Order: 1 Piece
1. Perfect accessory device for twin-screw extruder.

2. High temperature oil pump for enforced cycle. Electrical heating. Enforced cooling for constant temperature control, fast ...
Min. Order: 1 Piece
1. To pelletize various thermoplastic such as ABS, CA, PBT, PC, PE, PET, POM, PP, PS, PVC and SAN, etc., fiber reinforced thermoplastic and mineral-filled thermoplastic. It can be ...
Min. Order: 1 Piece
Air and powder are conveyed in low vacuum and separated by advanced filter which solve the problem that filter is easy jammed which happens with congeners in China for quite a long ...
Min. Order: 1 Piece
1. Rotates and overturns materials by rotary vanes for fast mixing.
2. Suitable for mixing all kinds of plastic granule and master batch for injection machine and extruder. It′s ...
Min. Order: 1 Piece
Feature:
1. It′s mixing, whipping, drying and dyeing for plastic, rubber and chemical, etc in producing plate, pipe, profile and degradation, etc.
2. Negative pressure mixing, ...
Min. Order: 1 Piece
1. Mainly used for feeding, mixing, coloring and drying of various resins, polyethylene, polypropylene and PVC, phenol aldehyde etc.
2. It can dry and volatilize before shaping of ...
Min. Order: 1 Piece